Make sure the parking brake is set. Ford may change the contents without notice and without incurring obligation. Gasoline may contain benzene, which is a cancer-causing agent. Enter the factory set 5—digit code. This value is not the same as the average fuel economy display. Park the unloaded vehicle on a level surface.
The more you know and understand about your vehicle, the greater the safety and pleasure you will derive from driving it. Make sure the headlamps and vehicle accessories are off. If your vehicle is equipped with a mini message center, refer to Mini message center electronic compass temperature display in the Driver Controls Chapter. Do not remove these components from your vehicle when using snow tires and chains. As many as 5 complete circles may be required. To ensure that you have used the correct buckle you should hear a snap and feel it latch.
Refer to your Scheduled Maintenance Guide to determine the correct service interval. Do not grip the spokes. The oil from your hand could cause the bulb to break the next time the headlamps are operated. High beams Push the lever toward the instrument panel to activate. Use only Ford recommended replacement fasteners. Note: In the illustrations, lightning bolts are used to designate the assisting boosting battery.
Install the bulb socket in lamp assembly by turning it clockwise. Seek: Press to access the next strong station or track. Install the new bulb in reverse order. Odometer: Registers the total miles kilometers of the vehicle. Also use in menu mode to select various settings. Repeat this procedure for another remote transmitter if desired. The indicator light on the control will illuminate when activated.
This program is separate from the New Vehicle Limited Warranty. Ford Motor Company has not approved a slingbelt towing procedure. If you did not take advantage of the Ford Extended Service Plan at the time of purchasing your vehicle, you may still be eligible. Ford Motor Company will repair or. Put the indicator back in and ensure it is fully seated. Install the new bulb in reverse order.
The following are reasons most often given for not wearing safety belts: All statistics based on U. Rear defrost if equipped : Press to defrost the rear window. Assemble the jack handle as shown in the illustration. Turn off the engine and remove the key. Ford Motor Company and Ford of Canada do not access event data recorder information without obtaining consent,.
Set the parking brake and shift to P Park. Each seat cushion can be flipped up into the seatback position. Refer to Programming spare keys for instructions on how to program the coded key. To install the bed extender, follow the removal procedure in reverse order. Repeat this tightness check procedure when servicing the spare tire pressure every six months, per Scheduled Maintenance Guide , or at any time that the spare tire is disturbed through service of other components.
Intended only for off-road applications such as deep sand, steep grades or pulling heavy objects. Illuminates when 4H is selected. The bumper has a 5,000 lbs. With the ignition on and all doors closed, allow the vehicle to stand for several minutes so that it can level. If other than Ford, Motorcraft or Ford-authorized parts are used for maintenance replacements or for service of components affecting emission control, such non-Ford parts should be equivalent to genuine Ford Motor Company parts in performance and durability. Lift the hood until the lift cylinders hold it open.